|
Control Panels Specification of Control Panels (For Industrial Automation)
- Panels for Valve / Dampers position control having single phase or three phases actuators.
- Panels for controlling the temperature of furnaces, killens and other temperature based systems
- Panels for speed controlling for conveyors having AC or DC drives.
- Custom built panels using Programmable logic controllers as per the requirement
SPECIFICATIONS
|
Supply Voltage
|
3phase 415 VAC 50 Hz.
|
|
Out put Voltage
|
3ph.415VAC, reversible O/P for 3ph Actuator Motors.
|
|
Display indication
|
0-100% Display indication each for 3 Actuators, close to open.
|
|
Indicators
|
R, Y, B phase indication. Valve opening, Closing indication, valve full open, full close Indication, Torque trip indication. |
|
Selector Switch
|
Auto / Manual operation selection provided. |
|
Automode
|
In auto mode valves can be operated Through external I/P Signal of 4-20mADC 0-1DV DC or 0-10VDC potential free Contacts.
|
|
Manual Mode
|
In manual mode the valves can be operated Through OPEN/CLOSE push buttons Provided on the panel. |
|
Control O/P
|
4-20mA O/P is provided for 0100% opening of the valve for remote indication |
|
Remote Control
|
In manual mode provision is there to Connect external push button for remote Operation
|
|
Interlocking
|
There is interlocking between 1st and 3rd Valve.
|
|
Lequid level sensing
|
The 2nd valve gets on only if the liquid Level is in required level
|
|
Protection
|
MCB is provided for mains supply. Fuses provided for each motor, over torque trip & Thermal over load relay provided
|
|
Emergency OFF/STOP switch
|
Emergency OFF/STOP, turn to release type Push button provided.
|
|
Single Phasing
|
Single phase preventer is provided. preventer
|
| Low pressure Protection |
If the pressure at the outlet of the pump rops lower than required level valve 2 Trips
|
|
Fax : 91-80-23216294
Send Email
Call me Free
Send SMS