Cookie Img
Back to top
Call Us
Home » Products » UPS & Inverter Kits » UPS & Inverter Kits

UPS & Inverter Kits

UPS & Inverter Kits
UPS & Inverter Kits
Product Code : 19
Product Description

Our company instrumental when it comes to manufacturing and supplying certified range of UPS & Inverter Kits. There are numbers of models available in our stock of kits with different technical specifications. Widely used for continuous power supply, these kits are reckoned in market for their excellent back up mode, protection from overvoltage and superior quality. These UPS & Inverter Kits are manufactured from high quality of materials sourced from the trusted vendors of market.

Sine Wave Inverter / UPS Kits Model No. BE-12K

Features
  • Micro Controller based digital PURE SINE WAVE Home UPS kits are an excellent Microcontroller Kits to demonstrate the working of a power electronic system.
  • The output waveform is pure sine wave and the system can have rated load of 800, 1000, 1400VA.
  • The charging mechanism used is constant current-constant voltage. This will ensure better battery management. Overload and short circuit is provided both in firmware and hardware.
  • The output voltage is regulated within a range of 210-250 V. The kit runs on a 12V DC (600 & 800VA) and 24V DC (1400VA) bus and is designed to get high efficiency Micro controller.
  • SMPS based charger with complete battery management    (with multi stage)
  • Charges battery from 110v on words.
  • Charging current l amp to 12 amp.
  • Pure sine wave output with and without load.
  • BOM cost considerably equal to square wave design.
  • In built temperature sensor.
  • Highest efficiency for more backup time.
  • Synchronized change over for computers.
  • Shorts circuit and return voltage protection.
  • Restart tries 10 times in over load condition.
  • Soft start for heavy load and cold start.

Specifications

  • AC Input: 100 to 285 ± 10V AC (175 to 270V in Home UPS mode).
  • Output Voltage Range: 200-250V AC (backup mode).
  • Output Frequency: 50 ± 0.1 Hz.
  • Output Waveform: Pure Sine wave.
  • Transfer Time: 15-18m Sec. in Home UPS mode.
  • Display: LED (Mains, charging, charged, inv, OL, BAT, mode)
  • Battery Charger Range: 125 to 275 V AC.
  • Battery Charging Current:2Amp. to 15 Amp. DC.
  • Battery Boost Voltage: 13.8 / 14.2 Volts  ± 0.1 V.
  • Battery Low Off: 9.6 Volts   ± 0.2 V.
  • Overload: Trips after 10 seconds. Four retries.
  • Jumper Selections for: Mode, Charging Amp / Boost Voltage.

Square Ware Inverter / UPS kits Model No. BE-5K

Range: 12 volts - 600 - 800 VA 24 volts - 1000 VA, 1400 VA 48 volts - 2000 VA

Features

  • Based on highly reliable microcontroller.
  • MOSFET based power stage with PWM AC output.
  • Backup mode protected against overload, short ckt., etc.
  • Automatic overload reset.
  • Over current of MOSFET's protected within micro seconds.
  • Can accept any input waveform (sine, square, generator etc.)
  • Automatic low battery warning and cut off.
  • FUZZY LOGIC Battery charging control.
  • Charging current variable (2Amp to 15 Amp.)
  • Unique home away feature shuts down backup mode.
  • Displayed on LED's / LCD.   

Specifications

  • Range Available: 600VA and 800VA / 12V, 1000VA and 1500VA /24 V, 2500VA / 48V.
  • AC Input: 100 to 285  ± 10V AC (175 to 270V in Home UPS mode).
  • Output Voltage Range: 200-250V AC (backup mode).
  • Output Frequency: 50 ± 0.1 Hz.
  • Output Waveform: PWM square wave.
  • Transfer Time: 15-18m Sec.
  • Display: LED (Mains, charging, charged, inv, OL, BAT, mode). LCD (16 X 1 lines).
  • Battery Charger Range: 125 to 275 V AC.
  • Battery Charging Current: 2Amp. to 15 Amp. DC
  • Battery Boost Voltage: 13.8 / 14.2 Volts‚ ± 0.1 V.
  • Battery Low Off: 9.6 Volts ± 0.2 V.
  • Overload: Trips after 10 seconds. Four retries.
  • Jumper Selections for: Mode, Charging Amp, Overload



Contact Details
No.653, Ground and 1st Floor, 4th Main Road, 2nd Cross, Kottigepalya, Bengaluru - 560091, Karnataka, India
Send Inquiry Send SMS    Call Me Free
Mr. Venkatesh Babu (Partner)